Packet Filters - Weidmuller IE-WL-VL-AP-BR-CL User Manual

Wi-Fi device IE-WL-VL-AP-BR-CL
Default gateway
Setting
IP address of a default
gateway
Subnet mask
Setting
Subnet mask
Primary/ Secondary DNS server
Setting
IP address of Primary/
Secondary DNS server
Start IP address
Setting
IP address
Maximum number of users
Setting
1 to 999
Client lease time
Setting
2 to 14400 minutes

Packet Filters

The IE-WL-VL-AP-BR-CL includes various filters for IP-based packets going through LAN and WLAN interfaces.
You can set these filters as a firewall to help enhance network security.
MAC Filters
The IE-WL-VL-AP-BR-CL's MAC filter is a policy-based filter that can allow or filter out IP-based packets with
specified MAC addresses. The IE-WL-VL-AP-BR-CL provides 32 entities for setting MAC addresses in your
filtering policy. Remember to check the Active check box for each entity to activate the setting.
MAC filters
Setting
Enable
Disable
Description
The IP address of the router that connects to an outside
network
Description
Identifies the type of sub-network (e.g., 255.255.0.0 for a
Class B network, or 255.255.255.0 for a Class C network)
Description
The IP address of the DNS Server used by your network. After
entering the DNS Server's IP address, you can use URL as well.
The Secondary DNS server will be used if the Primary DNS
server fails to connect.
Description
Indicates the IP address which IE-WL-VL-AP-BR-CL can start
assigning
Description
Specifies how many IP address can be assigned continuously
Description
The lease time for which an IP address is assigned. The IP
address may go expired after the lease time is reached.
Description
Enables MAC filters
Disables MAC filters
3-45
Web Console Configuration
Factory Default
None
Factory Default
None
Factory Default
None
Factory Default
None
Factory Default
None
Factory Default
14400 minutes
(10 days)
Factory Default
Disable