Table of Contents
Advertisement
Overview
Weidmüller's Wireless Access Point/Client/Bridge is ideal for applications
that are hard to wire, too expensive to wire, or use mobile equipment that
connects over a TCP/IP network. The WLAN device is rated to operate at
temperatures ranging from 0 to 60°C for standard models and -40 to
75°C for extended temperature models and is rugged enough for any
harsh industrial environment. Installation is easy, with either DIN-Rail
mounting or distribution boxes. The DIN-Rail mounting ability and IP30
housing with LED indicators make the device a convenient yet reliable
solution for any industrial wireless application.
Package Checklist
Weidmüller's WLAN device is shipped with the following items. If any of
these items is missing or damaged, please contact your Weidmüller
customer service for assistance.
•
1 IE-WL(T)-AP-BR-CL-ABG-EU(US)
•
2 Swivel-type Antennas (2dBi, RP-SMA, 2.4&5GHz)
•
1 Hardware Installation Guide
•
CD-ROM with User's Manual and Windows Utility (option)
Please download CD-ROM from Internet page
http://www.weidmueller.com/downloads
•
1 Cable Holder with a Screw
•
2 Protective Caps
Installation and Configuration
Before installing the Wireless Device, make sure that all items in the
Package Checklist are in the box. In addition, you will need access to a
notebook computer or PC equipped with an Ethernet port. The
IE-WL-AP-BR-CL-ABG has a default IP address that you must use when
connecting to the device for the first time.
Step 1: Select the power source
The Wireless device can be powered by a DC power input or PoE (Power
over Ethernet). The device will use whichever power source you choose.
Step 2: Connect the WLAN device to a notebook or PC
Since the IE-WL-AP-BR-CL-ABG supports MDI/MDI-X auto-sensing, you
can use either a straight-through cable or crossover cable to connect the
device to a computer. If the LED indicator on the IE-WL-AP-BR-CL-ABG's
LAN port lights up, it means the connection is established.
Step 3: Set up the computer's IP address
Set an IP address on the same subnet as the IE-WL-AP-BR-CL-ABG. Since
the IE-WL-AP-BR-CL-ABG's default IP address is 192.168.1.110,
and the subnet mask is 255.255.255.0, you should set the IP address of
the computer to 192.168.1.xxx and subnet mask to 255.255.255.0.
- 2 -
Advertisement
Table of Contents
