Related Manuals for Blizzard Lighting SwitchBlade Micro
Summary of Contents for Blizzard Lighting SwitchBlade Micro
- Page 1 MICRO Blizzard Lighting, LLC www.blizzardlighting.com Waukesha, WI USA Copyright (c) 2014...
-
Page 2: Table Of Contents
DMX Channel Values In-Depth Troubleshooting 5. Appendix A Quick DMX Lesson Keeping Your SwitchBlade™ Micro As Good As New Returns (Gasp!) Shipping Issues Tech Specs Luminous Intensity Dimensional Drawings Page 2 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 3: Switchblade™ Micro Moving Head Fixture
Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing document or to create a new document to correct any errors or omissions at any time. -
Page 4: Safety Instructions (Don't Stick Your Hand In The Toaster!)
• Avoid direct eye exposure to the light source while it is on. Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact Blizzard Lighting at support@blizzardlighting.com. Page 4 SwitchBlade™... -
Page 5: Meet The Switchblade™ Micro
Blue Intensity (0% <--> 100%) Blue Intensity (0% <--> 100%) White Intensity (0% <--> 100%) White Intensity (0% <--> 100%) Built-in Programs, Sound Active Motor Reset (150-200) Page 5 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 6: The Switchblade™ Micro Pin-Up Picture
Head / Arms RGBW LED 4-Button LED Control Panel Heavy-Duty Cast Aluminum Enclosure Figure 2: The Rear Connections Cooling Vents On/Off Switch DMX In DMX Out Power In Page 6 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 7: Setup
Maximum capacitance between conductors – 30 pF/ft. Maximum capacitance between conductor & shield – 55 pF/ft. Maximum resistance of 20 ohms / 1000 ft. Nominal impedance 100 – 140 ohms Page 7 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 8: Cable Connectors
Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication. Page 8 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 9: Fixture Linking (Master/Slave Mode)
For the safety of yourself, your audience, and the fixture... always take advantage of the use of the stand’s safety pins! Page 9 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... - Page 10 ® UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING RESPONSI- BLE FOR ANY DAMAGE FROM SUCH OPERATION. • Fixtures bearing the above logo MUST only use cable and connectors which separate chassis/case ground from cable shielding. Cabling with the shield connected to the connector’s case/chassis may cause malfunc-...
- Page 11 NOTE: The color of the LED DURING opera- tion does not indicate channel group, instead it indicates whether the unit is transmitting or receiving. That’s It! Page 11 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC...
-
Page 12: Operating Adjustments
Then use the <UP/DOWN> buttons to scroll through any submenu options, and press <ENTER> to save. To return to the previous option or menu, press the <MENU> button. Page 12 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 13: Control Panel Menu Structure
Reverse Display = Off rd -- rdon Reverse Display = On Restore default settings = No dFoF dF -- dFon Restore default settings = Yes <ENTER> Motor Reset Page 13 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 14: Dmx Mode
1.) Navigate the menu using the <MENU> button until you reach rdoF. 2.) Push the <ENTER> button. 3.) Use the <UP/DOWN> buttons to select either rdoF (No) or rdon (Yes). 4.) Press the <ENTER> button to confirm. Page 14 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 15: Restore Default Settings
Color Fade (Slow <--> Fast) 241 <--> 255 Sound Active Mode 000 <--> 149 No Function 150 <--> 200 Motor Reset 201 <--> 255 No Function Page 15 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 16: Troubleshooting
Use Only DMX Cables. Responding Install a Terminator. Erratically Check all cables for defects. Reset fixture(s). If your problem isn’t listed, or if problems persist, please contact support: support@blizzardlighting.com. Page 16 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 17: Appendix
7 so it would respond to channels 7 through 12. Dimensional Drawings 4.9 in 2.9 in (12.4 cm) (7.3 cm) 5 in 4.9 in (12.7 cm) (12.3 cm) Page 17 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 18: Keeping Your Switchblade™ Micro As Good As New
Damage incurred in shipping is the responsibility of the shipper, and must be reported to the carrier immediately upon receipt of the items. Claims must be made within seven (7) days of receipt. Page 18 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... -
Page 19: Tech Specs
I just wanted to waste a little more time. Okay, that should do it. 2-year limited warranty, does not cover mal- Warranty function caused by damage to LED’s. Page 19 SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC... - Page 20 Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting...