Ram Installation - EverFocus eIVP5600 User Manual

2.3 RAM Installation

The eIVP5600 supports 260-pin DDR4 2133 MHz SODIMM x 2. You can install the RAM on the
DIMM port of the motherboard.
1. Make sure the NVR is power-off.
2. Unscrew the four screws on the bottom cover and then remove the bottom cover.
3. Find the DIMM port on the motherboard and install the RAM.
4. The second DIMM port is on the other side of the motherboard. To use the second DIMM
port, follow Step 3 and Step 4 in 2.1 Storage Installation to remove the Top Cover from the
model and turn the motherboard to the other side.
5. Screw back the front cover and bottom cover to the model.
10
eIVP5600 AI Mobile NVR