2.2 GPS Antenna Installation
The eIVP5600 supports onboard GPS. To enable the GPS function, connect a GPS Antenna to the
antenna port.
1. Make sure the NVR is power-off.
2. Unscrew the four screws on the bottom cover and then remove the bottom cover.
3. Find the GPS connector on the motherboard. Connect one end of the RF cable to the GPS
connector and the other end to the Antenna port.
4. Screw the GPS antenna to the Antenna port.
5. Screw the bottom cover back to the model.
GPS Connector
9
eIVP5600 AI Mobile NVR
Antenna Port