eIVP5600 AI Mobile NVR
4.6 Setup Submenu: Security
Change User/Administrator Password
You can set a User Password once an Administrator Password is set. The password will be required
during boot up, or when the user enters the Setup utility. Please Note that a User Password does
not provide access to many of the features in the Setup utility.
Select the password you wish to set, press Enter to open a dialog box to enter your password (you
can enter no more than six letters or numbers). Press Enter to confirm your entry, after which you
will be prompted to retype your password for a final confirmation. Press Enter again after you
have retyped it correctly.
Removing the Password
Highlight this item and type in the current password. At the next dialog box press Enter to disable
password protection.
34