Basic Weighing Function - Sartorius Extend Series Operating Instructions Manual

Basic Weighing Function

Features
– Taring the balance/scale
– Printing weights
Example
Simple Weighing
Step
1. Switch on the balance/scale
Self-test is performed,
followed by automatic
initial tare function.
2. Place container on weighing pan
(in this example: 11.5 g).
3. Tare the balance/scale
4. Place sample in container
(in this example: 132 g).
5. Print weight.
Preparation
§ Switch on the balance/scale: Press e
§ Tare the balance/scale, if necessary:
Press w
$ If necessary, change the configuration
settings:
see the chapter entitled "Configuration"
$ If desired, load the factory settings:
see the chapter entitled "Configuration"
Additional Functions
$ Switching off the balance/scale:
Press e
Key (or instruction) Display/Printout
e
+
w
+
r
N
0.0 g
11.5 g
0.0 g
132.0 g
+ 132.0 g
13