Table of Contents
Advertisement
2. The name and function of each part
Bar graph display
The measurement value of the main
monitor is indicated by the analog.
(Setting which does bar graph display
of the measurement value of sub monitor
is also possible.)
Scale markings
It sets automatically by
measurement-range setting.
In setting mode, it is used
as a switch that changes a
setting item.
If this switch is pushed 1 second
or more continuously, it will
reset an alarm, the maximum value,
and the minimum value (factor
which it is displaying on the
main monitor).
In setting mode, it uses it as
a switch to which it moves a
setting item (move up).
It uses it as a switch which it
changes to setting mode.
If it continues pushing 3 seconds
or more, it will change to setting
mode.
In setting mode, it is used as a
switch that determines a set point.
Digital display
Measurement monitor can watch 4 elements at the same time.
Sub monitor Sub monitor Main monitor Sub monitor
(Left)
(Center)
The switch to which general
measurement display (usually)
and the maximum minimum measurement
display are changed.
In setting mode, it uses it as a
switch to which it moves a setting
item (move down).
8
(Right)
Lower limit setting index
An lower limit set point is displayed.
Upper limit setting index
An upper limit set point is displayed.
Unit display
It sets automatically by
measurement-range setting.
The switch to which
measurement displays element
of main monitor is changed.
If it is not operated for 10 minutes
after a display change, it returns to the
original measurement display factor.
In set mode, it is used as a switch that
changes a setting value.
It is the switch that changes a line
(phase) display of voltage.
If it is not operated for 10 minutes
after a display change, it returns to the
original phase display.
In setting mode, it is used as a switch
that terminates setting mode.
Maximum and minimum
General
MAX/MIN
measurement
display
MAX/MIN
SVLC-212-175
measurement
display
Advertisement
Table of Contents
