Setting Mode 2 - Daiichi Electronics SVLC-110L Instruction Manual

5.3.2 Setting mode 2

Display mode
Setting mode 2 is selected by pressing SET and RESET/SHIFT switches continuously for longer than 3 seconds.
Pushing MODE switch performs movement of setting item.
The present mode can be returned to the display mode by pressing DISPLAY switch.
< Caution >
If setting change should have been mistaken, a display and output of measurement are not obtained correctly.
Therefore, users must not set. The setting item without the corresponding option is not displayed.
SET and
RESET/SHIFT
3 seconds
DISPLAY
Measurement range setting
DISPLAY
Analog output setting
DISPLAY
External operation input setting
DISPLAY
Measurement display ON/OFF setting
DISPLAY
Settings initialization
211～214
MODE
221A～224A
MODE
231
MODE
241～242
MODE
251
MODE
32
SVLC-212-175
Setting mode 2