Daiichi Electronics SVLC-110L Instruction Manual page 35

◆ 214 Digit number of frequency range
Sets the digit number of frequency range.
Selection by ＋ and － , set value is updated by SET .
Default setting：3 digits
4 digits
(2) 221A～224A Analog output setting 【With option】
Various setting of analog output is performed.
221A
Ao1 output factor
◆ 221A～223A AO (analog output) 1～3 output factor.
Sets the output factor of each analog outputs.
Selection by ＋ and － , set value is updated
by SET .
Default setting：
AO1 V(UV)(3φ3W)，V(UN)(1φ3W U-W-N)，V(1φ2W)
AO2 V(VW)(3φ3W)，V(WN)(1φ3W U-W-N)，OFF(1φ2W)
AO3 V(WU)(3φ3W)，V(UW)(1φ3W U-W-N)，OFF(1φ2W)
OFF：
＋
Nothing
－
－
＋
◆ 224A Low input cut
It is the function which makes analog output a lower
limit at the case of a minute input (input which
corresponds to 0.5％ or less).
A function can be selected from ON (Use) and OFF (No
operation).
Selection by ＋ and － , set value is updated
by SET .
Default setting：OFF (No operation)
＋
＋
3 digits
－
－
MAX/MIN
222A
Ao2 output factor
RESET/
SHIFT
＋
1：V(UV) 2：V(VW)
－
－
4：Hz 3：V(WU)
＋
Setting No.
Setting factor
MAX/MIN 223A
Ao3 output factor
RESET/
SHIFT
RESET/SHIFT
MAX/MIN
New setting
Now setting
Setting No.
＋
－
At 3φ3W
New setting
Now setting
Setting No.
Setting factor
34
New setting Now setting
Digit number of frequency range
MAX/MIN 224A
Low input cut
RESET/
SHIFT
Ao1 output factor
Low input cut
SVLC-212-175