Daiichi Electronics SVLC-110L Instruction Manual page 26

(4) Setting of range digit number.
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET and RESET/SHIFT together for longer than 3 seconds
Sets the digit
number of voltage
Press RESET/SHIFT
range.
(212)
Press SET
Press SET and RESET/SHIFT together for longer than 3 seconds
Sets the digit
Press RESET/SHIFT
number of
frequency range.
Select a digit number by ＋ and －
(214)
Selected digit number is entered
(5) Setting of analog output.
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET and RESET/SHIFT together for longer than 3 seconds
Sets the output cut
function at the
Press RESET/SHIFT
case in minute
input (0.5％ or
less) of analog
Select a low Input cut ON/OFF by ＋ and －
output.
(224A)
Selected action is entered
(6) Setting of alarm output.
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET for longer than 3 seconds
Sets the reset
method of alarm
Select a reset method by ＋ and －
output.
(122AL)
The selected reset method is entered
Press SET for longer than 3 seconds
Sets the contact
delay time of
Press RESET/SHIFT
alarm output.
(123AL)
The selected contact delay time is entered
Setting and operation procedures
Press RESET/SHIFT
(212)
Selected digit number is entered
Press RESET/SHIFT
(212)
Press DISPLAY
Setting and operation procedures
Press RESET/SHIFT
(222A)
Press DISPLAY
Setting and operation procedures
(111)
(111)
Select an contact delay time by ＋ and －
(123AL)
25
Select a digit number by ＋ and －
(213)
Press DISPLAY
Press RESET/SHIFT
(213)
Press SET
Returns to display mode.
Press RESET/SHIFT
(223A) (224A)
Press SET
Returns to display mode.
Press MODE Press RESET/SHIFT
(121AL)
Press SET
Press DISPLAY Returns to display mode.
Press MODE Press RESET/SHIFT
(121AL)
Press DISPLAY
SVLC-212-175
(211)
Returns to
display mode.
(211)
(214)
Press MODE
(211) (221A)
(122AL)
(122AL)
Press SET
Returns to
display mode.
Page
33
33,34
Page
34
Page
30
30