Daiichi Electronics SVLC-110L Instruction Manual page 36

(3) 231 External operation input setting【With option】
Various setting of external operation input is performed.
◆ 231 External operation input function
The function of each external operation
input (alarm reset, maximum / minimum reset,
all reset) can be selected.
Selection by ＋ and － , set value is
updated by SET .
Default setting (With alarm-output option)
Alarm reset
Alarm reset
－
(Alarm,Maximum/minimum)
＋
・About the setting display in an external operation input function
Function The contents of a display at the function setting
"ALARM" and "RESET" are displayed by turns by
Alarm reset
7 segment display.
Maximum / "MAX." and "MIN." of guidance and "RESET" are
minimum reset displayed by 7 segment display.
"ALL" and "RESET" are displayed by turns by
All reset
7 segment display.
(4) 241～242 Measurement ON/OFF setting
Measurement display ON/OFF setting of each measurement
factor is performed.
Selection by ＋ and － , set value is updated by SET .
Default setting：ON (All measurement factors)
241
Voltage
(5) 251 Settings initialization
Initializes the each settings (return to a default setting).
◆ 251 Settings initialization
Initializes the each settings (return to a default setting).
By pushing SET for 3 seconds, all the settings of setting 1 and setting 2 are initialized.
(Before initialization)
Maximum /
＋
minimum reset
－
All reset
－
＋
MAX/MIN
242
Frequency
RESET/SHIFT
RESET/SHIFT
MAX/MIN
SET
3 seconds
Setting No.
Initialization of setting value
Setting factor
Setting No.
(Initialization completion)
35
New setting
ALARM and RESET are
displayed by turns.
(Alarm reset)
Now setting
Setting No.
Now setting New setting
display point display point
Sub monitor
Main monitor
(right)
New setting Now setting
Voltage ON/OFF
Setting No.
Completed of
initializing
SVLC-212-175