Rangemaster Professional 90 Gas FSD User Manual page 24

Dear Installer
Before you start your installation, please complete
the details BELOW.
If your customer has a problem relating to your
installation they will be able to contact you easily.
Thank you
Installer's Name
Installer's Company
Installer's Telephone number
You will need the following
equipment to complete the cooker
installation satisfactorily
You will also need the following
tools:
1. Electric drill
2. Masonry drill bit & Rawlplugs
(only required if fitting the cooker on a stone or
concrete floor)
3. Steel tape measure
4. Cross head screwdriver
5. Flat head screwdriver
6. Spirit level
7. Pencil
8. Adjustable spanner
9. Screws for fitting stability bracket
24
STABILITY BRACKET
If the cooker is to be
supplied with gas through
a flexible hose, a stability
bracket or chain must be
fitted.
These are not supplied
by with the cooker but
are available at most
builders merchants.
GAS PRESSURE
TESTER
It is important the gas
pressure is set correctly
FLEXIBLE GAS HOSE
Must be in accordance
with the relevant
standards. For LP Gas
it should be suitable
for LPG, capable of
50mbar pressure, 70°C
temperature rise and carry
a red stripe, band or label.
A hose is not supplied
by with the cooker.
MULTIMETER
(for electrical checks)
Make sure the installation
is electrially safe.