Table of Contents
Advertisement
Removing the Chassis Cover
The OPS Module consists of a computing board in a wrapper chassis. Pease
observe the following guidelines and follow the procedure to open the
system.
1. Make sure the system and all other peripheral devices connected to it
have been powered-off.
2. Disconnect all power cords and cables.
3. The 4 mounting screws on the top and bottom cover of the system
chassis, and the 2 screws that affix the front panel to the chassis should
all be removed to open the system. Put these screws in a safe place for
later use.
Mounting screw
6
Advertisement
Table of Contents
