Table of Contents
Advertisement
Installing a SODIMM and an M.2 Card
The OPS Module is equipped with two SODIMM slots (SO_DIMM1 & 2) in
which one can be accessed from the back cover. An additional M.2 slot can
also be accessed from the back cover without opening the system's chassis.
Opening to the
M.2 (Type 2280) slot
Installing a SODIMM
Retention Notch
The system supports two DDR4 SODIMM (dual channel) sockets. To install
a memory module, grasp the memory module by its edges and align the
module's notch with the socket's notch; then insert the memory into the
Retention Clip
socket at an angle and push it down until you feel a click.
Retention Notch
Retention Clip
4 5 °
Step 1
4 5 °
Step 2
Step 1
Notch
DDR4 SO-DIMM
Key
Socket Top View
Notch
DDR4 SO-DIMM
Key
Socket Top View
Retention Notch
Retention Clip
4 5 °
Step 1
4 5 °
Step 1
Step 2
Step 2
Step 3
Step 3
4
Opening to the
SODIMM
(SO_DIMM2) slot
Notch
DDR4 SO-DIMM
Key
Retention Notch
Socket Top Vie
Notch
Retention Clip
Key
DDR4 SO-D
Socket Top
Advertisement
Table of Contents
