VERITAS NetBackup 5330 Hardware Service Procedure page 8

HSP #133 Replacing a RAID canister in a Primary Storage Shelf or an Expansion canister in an Expansion Storage Shelf
3 Insert the air blocker into the open slot to make sure that correct airflow is maintained throughout
the storage shelf.
4 Locate the removed RAID canister.
Primary Storage Shelf RAID Canister Levers open
Warning: If you perform this procedure with the power turned on, you must complete it within 15
minutes to prevent the possibility of overheating the equipment.
Do not remove both canisters from the storage shelf at the same time. One canister must be
functioning at all times.
5 Set the canister on a flat, static-free surface, with the levers up. The canister is now upside-down.
6 Press down on both of blue latch buttons (circled).
8