VERITAS NetBackup 5330 Hardware Service Procedure page 6

HSP #133 Replacing a RAID canister in a Primary Storage Shelf or an Expansion canister in an Expansion Storage Shelf
• From a RAID canister, remove the FC cables that connect to the appliance. Remove the SAS
cables (if present) that connect to the Expansion shelf. Remove any Ethernet or other FC
cables.
• From an Expansion canister, remove the SAS cables that connect to the Primary shelf.
6 Do not remove the power cords.
7 Remove the FC SFPs from the RAID canister. The Expansion canister does not have any SFPs.
• Flip up the metal handle on the SFP.
• Use the handle to pull the SFP straight out from the port.
• Keep all SFPs in a safe location. You will re-install them in the new RAID canister.
8 Locate the lever(s) on the canister you need to remove.
The Primary Storage Shelf has one lever with an orange tab and one lever without a tab, per
canister. The lever with the orange tab overlaps the top of the other lever.
Primary Storage Shelf RAID Canister Levers (the lever with the orange tab is shown)
6