Advertisement
CRAFTAP 3
Brief Installation
and Connection Manual
!
For quick installation you will need:
• a drill with 10, 13, 18, and 70 mm diameter drill bits
• a flat-head screwdriver
• a 13 mm wrench
• 3/8'' rigid plastic hoses for the gas and beverage
supply and dispensing assembly drain
• a 1/2" rigid plastic hose for the flask drain
• the use of other appropriate tools is also permitted
2
Using a drill and power jigsaw, cut out the holes
in the counter top in accordance with the markings.
Observe safety rules while using
the power tools
Detailed instructions and assembly video are available at http://beerinnovations.com
1
Ensure that the installation location matches the
dimensions specified in the picture and indicated
on the template. Fix the template and use it to make
markings on the table board.
3
Use a screwdriver to screw studs into the threaded
holes in the bottom of the dispenser.
beerinnovations.com
800 mm
max 55 mm
400 mm
5
Advertisement
