Advertisement
Quick Links
WHAT IS BEERCASE
Pegas BeerCase
is designed for safe
filling of carbonated beverages in glass
bottles of 0,7 - 1 liter volume. Maximum
bottleneck diameter that is supports is
39 mm. BeerCase is compatible with all
foam-free taps listed on our website.
Please read the whole document before
setting up the device.
DIMENSIONS
Total height – 310mm
Total width – 135mm
BEERCASE
MANUAL
BeerCase
Package content
Bottom flask
Upper flask
Centering rubber
ring
Advertisement
Related Manuals for PEGAS BeerCase
Summary of Contents for PEGAS BeerCase
- Page 1 Centering rubber ring bottles of 0,7 - 1 liter volume. Maximum bottleneck diameter that is supports is 39 mm. BeerCase is compatible with all foam-free taps listed on our website. Please read the whole document before setting up the device.
- Page 2 In case of bottle breakage inside the BeerCase during the filling it is recommended to replace BeerCase with the new one, as it could get damaged with bottle fragments and is no longer safe for further fillings.
- Page 3 Step 2 Step 5 Cover the bottle with upper When the bottle is filled, remove flask until the bottleneck the BeerCase and put it on the touches the centering ring flat surface Step 3 Step 6 Remove the upper flask, take the...
- Page 4 BeerCase SAFETY WARNING NOTE If, when closing the PEGAS BeerCase, the upper and Please inspect glass bottle for possible lower flasks abut each other with a thread, adjust damages: cracks, scratches, chipping, the upper flask to align the thread and press the bottle down, then turn upper flask clockwise.