Advertisement
CRAFTAP 3 | Brief Manual on foamy beverages dispensing
e
e. press the beverage container tightly against the
pouring head by turning the adjusting assembly
knob clockwise.
If the beverage container type and size do not change in the next pouring, all you have to do is follow point
"c", "e" and "f" to place and fix the beverage container.
To prevent the possibility of an explosion, ensure that
all of the beverage containers being used have been
tested under a minimum pressure of 5 bars (73 psi)
and do not have any visible external damages.
2
Turn on the carbon dioxide supply by pushing back
the dispensing assembly handle until it stops.
4
Open the beverage supply channel by pulling the
dispensing assembly handle toward you until it
stops.
Detailed instructions and assembly video are available at http://beerinnovations.com
f
f. close the protective door after first ensuring that
the beverage container is tightly fixed.
To prevent injury caused by accidental
glass beverage container explosion,
always close the protective door
before dispensing.
3
When the sound of the container being filled with
gas subsides, return the handle to the upright
position and the gas supply will stop.
5
Slightly open the drain channel by turning the flow
control valve slowly counterclockwise and the
beverage container will start filling up.
2
Advertisement
