Advertisement
CRAFTAP 3 | Brief Manual on foamy beverages dispensing
10
Lower the full beverage container by turning the
adjusting assembly knob counterclockwise until
it stops, then open the protective door of the
dispenser.
12
After each pour wipe the rubber head gasket with
FOOD SAFE sanitary wipes.
Do not forget to sanitize the device daily and weekly to ensure a high quality of the dispensed
beverages and to meet hygienic requirements.
Detailed instructions and assembly video are available at http://beerinnovations.com
11
Take the beverage container out of the dispenser
and close it tightly with a lid as soon as possible
to preserve the quality of the beverage.
13
If you do not plan to continue using the dispenser
right away, it is recommended to turn off the
backlight lamps. This is for energy saving.
4
Advertisement
