Advertisement
Quick Links
Advertisement
Related Manuals for PEGAS CRAFTAP 3
Summary of Contents for PEGAS CRAFTAP 3
- Page 1 BRIEF MANUAL...
- Page 2 CRAFTAP 3 | Brief Manual The warranty period is 24 months We welcome your feedback and will review any complaints as to the dispenser ‘s quality at NPM, Ltd. toll-free hotline: 8 (800) 500-73-71 PO Box 239, Novosibirsk, 630108, Russia.
- Page 3 CRAFTAP 3 Brief Manual on foamy beerinnovations.com beverages dispensing а Make sure that the dispenser is ready for use: d. the dispensing assembly handle is upright; a. is connected to the power supply e. the flow control valve is turned all the way and the backlight lamps are on;...
- Page 4 CRAFTAP 3 | Brief Manual on foamy beverages dispensing e. press the beverage container tightly against the f. close the protective door after first ensuring that pouring head by turning the adjusting assembly the beverage container is tightly fixed. knob clockwise.
- Page 5 CRAFTAP 3 | Brief Manual on foamy beverages dispensing Turning the flow control valve within one rotation, Fill the bottle to just below the desired level and choose the filling speed based on the foam shut off the drain channel by turning the flow formation intensity.
- Page 6 CRAFTAP 3 | Brief Manual on foamy beverages dispensing Lower the full beverage container by turning the Take the beverage container out of the dispenser adjusting assembly knob counterclockwise until and close it tightly with a lid as soon as possible it stops, then open the protective door of the to preserve the quality of the beverage.
- Page 7 CRAFTAP 3 Brief Installation beerinnovations.com and Connection Manual 800 mm max 55 mm 400 mm For quick installation you will need: Ensure that the installation location matches the dimensions specified in the picture and indicated • a drill with 10, 13, 18, and 70 mm diameter drill bits on the template.
- Page 8 CRAFTAP 3 | Brief Installation and Connection Manual Place the dispenser on the counter top by aligning Put on the washers, screw the nuts onto the studs, it with the pre-drilled holes. Insert power cord and fix the dispenser on the table board by through rear hole.
-
Page 9: Maintenance Program
CRAFTAP 3 Brief Maintenance beerinnovations.com Manual In order to ensure smooth operation and performance of all the declared warranty obligations by the manufacturer, we recommend that you regularly maintain your device in accordance with the complete operation manual. The brief information provided can be used as a reminder. We recommend storing it near the dispenser. - Page 10 CRAFTAP 3 | Brief Maintenance Manual For sanitization you will need: • cylinder with carbon dioxide equipped with a regulator; • cleaning cloth; • keg for flush liquid, with a recommended volume • lint-free cloth; of at least 20 l (5 gal);...
- Page 11 CRAFTAP 3 | Brief Maintenance Manual Treatment stage The sequence of actions specified in items 4-13 should be performed for each treatment stage in accordance with the Maintenance Program. Flushing agent Fill the flush keg with the liquid whose temperature Make sure that the ends of the flask and dispensing...
-
Page 12: Final Stage
CRAFTAP 3 | Brief Maintenance Manual After the performance time of the treatment stage Disconnect the intake head from the flush keg expires, shut off the beverage supply channel without dismantling the gas and beverage and then shut off the drain channel. - Page 13 CRAFTAP 3 | Brief Maintenance Manual Remove the backing plate from the bottle tray. Twist Rinse the parts under running water and wipe them off the pouring head bushing, detach the gasket, dry with a clean lint-free cloth. Perform assembly in reverse order.
- Page 14 CRAFTAP 3 | Warranty Voucher Factory serial number PEGAS CRAFTAP 3 beverage dispenser Product name 24 months Warranty period Date of sale Name of trade organization Full name and signature of the seller Signature Name of the signer Stamp here CAUTION! •...
- Page 15 WARRANTY TERMS AND CONDITIONS 1. This warranty applies to the PEGAS CRAFTAP 3 manual dispensers used in the retail industry for pouring beer and other foamy beverages from kegs into glass bottles. 2. The warranty period of the product is 24 months.
- Page 16 npm-group.com | beerinnovations.com...