Table of Contents
Advertisement
5.
Press the [Set] button.
The changes are saved.
Audio settings
1.
Select [Audio] from the pull-down menu.
2.
Check the output level meter and gain limit.
Not displayed if the MAS-A100 is muted.
3.
Check/change the audio settings.
Recalibration is not required if settings are changed.
Configuration items for the Main output and for both the Main output and Rec
output are displayed (see "3.2 Audio settings").
Audio settings for the Rec output (capture range and noise gate) are not displayed
and cannot be configured here. Configure using the web UI of the MAS-A100.
4.
Press the [Set] button.
The changes are saved.
Note that the microphone gain and equalizer settings are saved immediately upon
being changed.
42
Advertisement
Table of Contents
