Log files
The log files of communications between MASM-1 and MAS-A100 are stored in the
C:¥Users¥[username]¥AppData¥Sony¥MasManager¥Log folder.
The discovery and IP address setup (see "Discovery and IP address setting (1/3)")
communications logs are stored in SCAN.log, and all other communications logs are
stored in CGI.log. The maximum size of log files is approximately 10 MB. When log
files reach the maximum size, they are backed up with a number prefix added to the
file name extension. Up to 10 files of each type of backup file can be created and used
in rotation in the order SCAN.log.1, SCAN.log2, ... SCAN.log.10 and CGI.log.1,
CGI.log.2, ... CGI.log.10.
Config file
MAS-A100 registration information is stored in the following config file.
C:¥Users¥[username]¥AppData¥Sony¥MasManager¥Config¥MasManager.config
When the files are deleted, all MAS-A100 registration information is also deleted, and
all settings in MASM-1 are initialized.
Note that these files are not deleted by uninstalling MASM-1.
Dante Controller preparation
Dante Controller is a free software application from Audinate for routing audio and
configuring devices on a Dante network.
24