Table of Contents
Advertisement
Name settings
1.
Select [Name/Path] from the pull-down menu.
2.
Check or edit the contents of [Name], [Description], [Path 1], [Path 2], and [Path
3], as required.
Set [Path 1] and [Name] to a character string of 4 to 16 characters.
Set [Path 2], [Path 3], and [Description] to an empty string or a character string
of up to 16 characters.
Valid characters are alphabetic, numeric, and symbol characters.
! " ' ( ) * + - . _ < >
[Path 2] must not be left blank if [Path 3] is specified.
Notes
MASM-1 groups MAS-A100 units with the same entries for [Path 1], [Path 2],
and [Path 3] on the [Group] pane, displaying a list of the MAS-A100 units in
the same group. Accordingly, MAS-A100 units in the same room should have
the same entries for [Path 1], [Path 2], and [Path 3] under normal
circumstances.
It is recommended that the number of MAS-A100 units in a group be limited
to 20 or lower to avoid slow response in MASM-1.
3.
Place a check mark beside MAS-A100 units that you want to unregister.
4.
Press the [Unregister] button.
The MAS-A100 units selected in step 3 are unregistered.
41
Advertisement
Table of Contents
