Table of Contents
Advertisement
Firewall
MASM-1 discovers MAS-A100 units by communication via UDP port 42380.
Configure the firewall of the PC to allow this communication to discover MAS-A100
units.
HTTP proxy
MASM-1 performs setup and operation of MAS-A100 units (except discovery) by
communication via HTTP. Configure the HTTP proxy of the PC to allow HTTP access to
the MAS-A100 units.
Password
1.
A password must be set after launching for the first time after installation.
The password must be at least eight characters and no more than 64 characters,
and contains at least one lowercase letter, one uppercase letter, and one number.
The password can also contain symbol characters.
! $ % ' ( ) = - ~ ^ | @ ` [ { } ] _ / ? < > + * .
2.
Enter the password when launching subsequently.
23
Advertisement
Table of Contents
