Table of Contents
Advertisement
Initialization and user name/password entry (2/3)
1.
Place a check mark beside the MAS-A100 units to register in MASM-1.
2.
Check the serial numbers.
3.
To allow access to the MAS-A100 units from MASM-1, enter the user name and the
password of the administrator for each MAS-A100 unit in [Username] and
[password], respectively.
Placing a check mark in [admin] automatically sets [Username] to "admin".
Placing a check mark in [Same as this app.] configures the same password as the
MASM-1 login password in [password].
4.
Check the [Status] display.
Only MAS-A100 units with [Status] of [OK] can be registered. For MAS-A100 units
with other status, modify the settings as described below, or deselect the
checkbox to skip registration.
[Status]
[OK]
[Uninitialized]
Description
Ready to register.
MAS-A100 unit is in the factory default state. Initialize
the unit.
28
Advertisement
Table of Contents
