You can also configure
Commands
on page 29).
VS-42H2
web pages enable performing the following:
•
Routing and Setting the Inputs and Outputs
•
Managing EDID
•
Setting Device Parameters
•
Upgrade the Firmware
•
Viewing the About Us Page
Routing and Setting the Inputs and Outputs
Use Routing page to perform the following actions:
•
Switching an Input to an Output
•
Muting and Unmuting Output AV
•
Locking and Unlocking Controls
Switching an Input to an Output
To switch an Input to an Output:
1. Click Routing on the Navigation List.
The Routing page appears.
2. Click Output1 or Output2.
VS-42H2 – Using Embedded Web Pages
VS-42H2
via Protocol 3000 commands (see
on page 18.
on page 20.
on page 22.
on page 23.
on page 16.
on page 17.
on page 17.
Figure 11: The Routing Page
on page 16.
Kramer Electronics Ltd.
Protocol 3000
16