Operating The Vs-88Hdcpxl 8X8 Dvi Matrix Switcher; Routing Inputs To Outputs; Disconnecting The Outputs - Kramer VS-88HDCPxl User Manual

6 Operating the VS-88HDCPxl 8x8 DVI Matrix
Switcher
This section describes how to:
 Route inputs to outputs (see
 Disconnect outputs (see
 Store and recall a setup (see
 Change the port switching speed (see
 Acquire the EDID (see
 Lock and unlock the front panel (see
 Reset the Ethernet configuration to default values (see
 Control the machine via the Ethernet port (see
6.1

Routing Inputs to Outputs

To route an input to an output:
 Press an OUT key, followed by an IN key to route this input to that output
To route one input to all outputs:
 Press ALL followed by an IN button. The input is routed to all outputs
6.2

Disconnecting the Outputs

To disconnect one output:
 Press the OUT button of the output to disconnect and press OFF
To disconnect all outputs at once:
 Press the ALL button and then press OFF. This disconnects all the outputs
VS-88HDCPxl - Operating the VS-88HDCPxl 8x8 DVI Matrix Switcher
Section 6.1)
Section 6.2)
Section 6.3)
Section
Section 6.5)
Section
6.4)
6.6)
Section 6.7)
Section 6.8)
13