Operating The Vs-42Hdcp 4X2 Dvi Matrix Switcher; Routing Inputs To Outputs; Disconnecting The Outputs - Kramer VS-42HDCP User Manual

6 Operating the VS-42HDCP 4x2 DVI Matrix
Switcher
This section describes how to:

Switch inputs to outputs (see

Disconnect outputs (see

Store and recall a setup (see

Change the port switching speed (see

Set HDCP on or off (see

Lock and unlock the front panel (see

Switch between protocol 2000 and protocol 3000 (see

Acquire the EDID (see

Reset the Ethernet configuration to default values (see
6.1

Routing Inputs to Outputs

To route an input to an output:

Press an INPUT button (from 1 to 4) in the TO OUTPUT 1 row to select an
input to switch to output 1

Press an INPUT button (from 1 to 4) in the TO OUTPUT 2 row to select an
input to switch to output 2
6.2

Disconnecting the Outputs

To disconnect output 1, press the OFF button on the TO OUTPUT 1 line and to
disconnect output 2, press the OFF button on the TO OUTPUT 2 line. The OFF
button illuminates.
VS-42HDCP - Operating the VS-42HDCP 4x2 DVI Matrix Switcher
Section 6.1)
Section 6.2)
Section 6.3)
Section
Section 6.5)
Section
Section 6.8)
6.4)
6.6)
Section 6.7)
Section 6.9)
11