Routing Inputs to Outputs
VS-44H2
enables routing an input signal to an output via the Routing Settings page This
section describes how to basically route an A/V input to any of the outputs.
To define the signal type, see
By default, input and output ports are set to audio-follow-video.
The Routing Matrix page displays the current routing status. For example, in
HDMI 1 input is currently routed to the HDMI 1 output as indicated by the green routing button
( ).
To route an input to an output:
1. In the Navigation pane, click Routing Settings. The Routing Settings page appears.
2. Click a white routing button within the matrix. For example, to route the HDMI 3 input to
the HDMI 1 output, click the routing button connecting them in the matrix:
VS-44H2 – Using Embedded Webpages
Setting HDMI Output Signals
Figure 14: Routing Matrix Page – Input to Output Example
Figure 15: Routing Settings Page – Routing an Input to an Output
Kramer Electronics Ltd.
on page 22.
Figure 14
the
21