Terminal Debugging - H3C S3100-52P Command Manual

Command Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch
Parameter
None
Description
Use the display diagnostic-information command to display system diagnostic
information, or save system diagnostic information to a file suffixed with diag in the
Flash memory.
Example
# Save system diagnostic information to the file default.diag.
<H3C> display diagnostic-information
This operation may take a few minutes, continue?[Y/N]y
Diagnostic-information
N=display)?[Y/N]y
Please input the file name(*.diag)[flash:/default.diag]:
% Output information to file: flash:/default.diag.
Please wait......
................................................
# Display the current diagnostic information of the system.
<H3C> display diagnostic-information
This operation may take a few minutes, continue?[Y/N]y
Diagnostic-information
N=display)?[Y/N]n
-------------------- display version --------------------
......
<Omitted>

1.3.3 terminal debugging

Syntax
terminal debugging
undo terminal debugging
View
User view
Parameter
None
Chapter 1 Basic System Configuration
is saved to
is saved to
1-11
& Debugging Commands
Flash or displayed(Y=save
Flash or displayed(Y=save