Command Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch
Example
# Display the information about scheduled reboot.
<H3C> display schedule reboot
System will reboot at 16:00:00 2002/11/1 (in 2 hours and 5 minutes).
3.1.10 reboot
Syntax
reboot [ unit unit-id ]
View
User view
Parameter
unit-id: Unit ID of a switch.
Description
Use the reboot command to restart a specified Ethernet switch.
Note:
When rebooting, the system checks whether there is any configuration change. If there
is, it prompts you to indicate whether or not to proceed. This prevents you from losing
your original configuration due to oblivion after system reboot.
Example
# Directly restart this switch without saving the current configuration.
<H3C> reboot
Start to check configuration with next startup configuration file,
please wait......
This command will reboot the device. Current configuration may be lost in next
startup if you continue.
This will reboot device. Continue? [Y/N] y
<H3C>
%Apr
1 23:57:58:685 2000 H3C DEV/5/DEV_LOG:- 1 -
Switch is rebooting...
Starting......
Chapter 3 Device Management Commands
Continue? [Y/N] y
3-7