Dataprobe iBoot-WiFi Manual page 13

Hold/Run: Click Hold to pause the scheduled event. Click Run to re-start the scheduled event.
Clear: Delete the scheduled event.
Click Save to save the current settings. Click Reset to delete any unwanted changes.
When one or more scheduled events have been programmed, the Home page will display an icon of a clock next to the
power status.
7.7. Password Settings
The iBoot-WiFi supports three modes of user and password
operation.
Login Required: This mode supports both User and Admin
users. Each user has a settable password. This is the factory
default mode.
Auto Login: This mode does not require a username of
password for the User level operation. No login challenge will be
required for any mode of operation, until any setup function is
requested. The Admin username and password is required for any admin functions.
User Disabled: There is no User account. The Admin username and password will be required for operation and setup
functions across all modes of operation.
Two passwords are used by iBoot. In the Login Required mode, The User Password allows access to the control of
iBoot, but not to the Setup functions. Clicking on the Setup button allows the Administrator to log in. Passwords can be
up to 20 characters long and are case sensitive.
Enter the current password then the new password twice to confirm.
Default Credentials
Role
Administrator
User
7.8. Firmware Upgrade
The Firmware upgrades for both the core iBoot-WiFi application
and the associated web pages are easily upgraded through the
browser interface. Click on the Upgrade button from any setup
page.
Firmware files are available from the Dataprobe website.
The latest firmware is always available from location
Address: dataprobe.com/upgrade/iboot-wifi
firmware: iboot-wifi-latest.bin
webpages: iboot-wifi-latest.ftfs
Files can also be downloaded from the iBoot-WiFi support page and placed on any web server. If this is done, change
the Server Address field to the new address.
iBoot-WiFi web pages are in a compressed format. To create and install your own custom web pages, contact
Dataprobe Technical Support.
Pre-Compliance v180808n
Username (fixed)
admin
user
iBoot-WiFi
Figure 16 Password Setting Page
Password (user set)
admin
user
Figure 17 Firmware Upgrade Page
Page 13