Raven SmarTrax Installation Manual page 25

Valve Harness Connections
FIGURE 8.
PSI
PORT 1B
PORT 1A
Connect the PSI connector to the transducer (P/N 422-0000-086) installed in Port PS of the SmarTrax
2.
valve.
Connect the PORT 1A connector to Port 1A of the SmarTrax valve.
3.
Connect the PORT 1B connector to Port 1B of the SmarTrax valve.
4.
Connect the LEFT INNER connector to the bottom coil of the stack on the SmarTrax valve.
5.
Connect the RIGHT OUTER connector to the bottom coil of the stack on the SmarTrax valve.
6.
Manual No. 016-4001-115 Rev. B
Cab Component Installation
LEFT INNER
RIGHT OUTER
21