C
3
HAPTER
FIGURE 11. Transducer Connection
4. Connect the VALVE connector to the open 4-pin Deutsch port on the PVES valve.
FIGURE 12. Valve Connection
5. Disconnect the machine's existing WAS connection location adjacent to the bulkhead in Figure 9 on page 13.
6. Install the WAS connectors of the valve harness between the machine's WAS connectors.
FIGURE 13. WAS Tee Connector
14
Buhler Versatile 350/375/400/450/500/550 Steering Ready, MY 2015 & Newer SmarTrax™ Installation
Connect
Tee
Here