Lutron Electronics QS Timeclock Installation And Operation Manual page 12

Adjusting Window Treatment Settings
Naming a Group of Window Treatments (Shades)
1. Enter programming mode.
Main menu
2. Use the Master buttons to highlight
CCI setup
"Shade Labels" and press the OK button
to accept.
Shade Labels
3. Use the Master buttons to highlight your
desired shade group. Press the OK button
Select group to accept.
4. Use the Master buttons to highlight
Shade Grp 1
"Custom" and press the OK button to
accept.
5. Use the Master buttons to scroll through
the characters (lowercase and uppercase
Label shade grp
letters, plus numbers 0 through 9). The
character you are currently changing will
Custom
be underlined on the screen. Press OK to
select the character you want, then repeat
for all available characters. Choose a
space (no character) and press OK for any
Label shade grp 1
remaining characters. Press the OK button
to accept.
1 / 11
A
6. The info screen will confirm that your
1: A
name has been saved.
7. Exit programming mode.
Saved
®
(continued)
1 2 3 4 5 6
QS Timeclock Installation and Operation Guide 12
Master
buttons
OK
OK
button
Timeclock
(back) button