Specifications - Weidmuller IE-SW-BL05 Series Hardware Installation Manual

Specifications

Technology
Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow Control
Processing Type Store and Forward
Flow Control IEEE 802.3x flow control, back pressure flow
control
Interface
RJ45 Ports 10/100BaseT(X) auto negotiation speed, F/H
duplex mode, and auto MDI/MDI-X connection
Fiber Ports 100BaseFX ports (SC/ST connector,
multi/single-mode)
LED Indicators P1, P2 (Power), 10/100M (TP port), and 100M
(Fiber port)
DIP Switch enable/disable broadcast storm protection
Optical Fiber
Multi-mode
Wavelength 1300 nm
Max. TX -10 dBm
Min. TX -20 dBm
RX Sensitivity -32 dBm
Link Budget
Typical Distance
Saturation
a. using [50/125μm, 800 MHz*km] cable
b. using [62.5/125μm, 500 MHz*km] cable
c. using [9/125 μm, 3.5 PS/(nm*km)] cable
Power
Input Voltage 12/24/48 VDC (9.6 to 60 VDC),
18 to 30VAC (47 to 63 Hz)
Input Current IE-SW-BL05-5TX: 0.1 A @ 24 VDC
IE-SW-BL05-SC/ST/SCS: 0.11 A @ 24 VDC
IE-SW-BL08-8TX: 0.13 A @ 24 VDC
IE-SW-BL08-SC/ST: 0.22 A @ 24 VDC
IE-SW-BL08-SCS: 0.17 A @ 24 VDC
Connection Removable 4-contact terminal block
Overload Current
Protection 1.1 A
Reverse Polarity
Protection Present
Physical Characteristics
Housing IP30 protection, metal case
Dimensions IE-SW-BL05-Models:
(W x H x D) 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in)
IE-SW-BL08-Models:
50 x 115 x 70 mm (1.96 x 4.52 x 2.76 in)
Weight IE-SW-BL05-Models: 175 g
IE-SW-BL08-Models: 275 g
Installation DIN-Rail Mounting
100BaseFX
Single-mode
1310 nm
0 dBm
-5 dBm
-34 dBm
12 dB 29 dB
a
5 km
40 km
b
4 km
-6 dBm -3 dBm
- 13 -
c