Table of Contents
Advertisement
Auto MDI/MDI-X Connection
The Auto MDI/MDI-X function allows users to connect the Ethernet switch's
10/100BaseTX ports to any kind of Ethernet device, without needing to pay
attention to the type of Ethernet cable being used for the connection. This
means that you can use either a straight-through cable or cross-over cable to
connect the IE-SW-PL06M-2TX-4PoE to Ethernet devices.
Specifications
Technology
IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1w,
Standards
802.1Q, 802.1p, 802.1X, 802.3ad, IEEE 802.3af for
PoE, IEEE 802.3at for PoE+
Protocols
IGMPv1/v2, GVRP, SNMPv1/v2c/v3, DHCP
Server/Client, BootP, TFTP, SNTP, SMTP, RARP,
GMRP, LACP, RMON, HTTP, HTTPS, Telnet,
Syslog, DHCP Option 66/67/82, SSH, SNMP
Inform, Modbus/TCP, LLDP, IEEE 1588 PTP, IPv6
MIB
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB,
Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON
MIB Group 1,2,3,9
Forwarding and
148810 pps
Filtering Rate
Processing Type
Store and Forward
Flow Control
IEEE802.3x flow control, back pressure flow control
Interface
RJ45 Ports
10/100BaseT(X) auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection
Console
RS-232 (RJ45)
LED Indicators
PWR1, PWR2, FAULT, 10/100M (TP port),
MSTR/HEAD and CPLR/TAIL, PoE
Relay Contact
Two relay outputs with current carrying capacity of
1A @ 24 VDC
DIP Switches
Master, Coupler, Turbo Ring, Reserve
Digital Input
Two inputs with the same ground, but electrically
isolated from the electronics
• For state "1": +13 to +30V
• For state "0": -30 to +3V
• Max. input current: 8 mA
Power
Input Voltage
24/48 DC
Input Current
Max 7.5 VDC(supports up to 4 Ports at 30 watts per
PoE port)
Overload current
Present
Protection
- 10 -
Advertisement
Table of Contents
