Table of Contents
Advertisement
1000M
(TP/SFP)
Specifications
Technology
Standards
Protocols
MIB
Interface
RJ45 Ports
Fiber Ports
Console Port
LED Indicators
Alarm Contact
Digital Input
Off
On
Blinking Data is being transmitted at 1000 Mbps.
GREEN
Off
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,
IEEE 802.3ab for 1000BaseT(X),
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,
IEEE 802.3x for Flow Control,
IEEE 802.1D for Spanning Tree Protocol,
IEEE 802.1w for Rapid STP,
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1p for Class of Service,
IEEE 802.1X for Authentication,
IEEE 802.3ad for Port Trunk with LACP
IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3,
DHCP Server/Client, DHCP Option 66/67/82,
BootP, TFTP, SNTP, SMTP, RARP, RMON,
HTTP, HTTPS, Telnet, SSH, Syslog, IPv6, LLDP,
IEEE 1588 PTP, Modbus/TCP, SNMP Inform
MIB-II, Ethernet-like MIB, P-BRIDGE MIB,
Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON
MIB Group 1,2,3,9
10/100/1000BaseT(X) auto negotiation speed, F/H
duplex mode, and auto MDI/MDI-X connection
Optional 100BaseFX (SC/ST connector) and
1000BaseSFP slot
RS-232 (10-pin RJ45)
PWR1, PWR2, FAULT, 10/100M (TP port), 100M
(fiber port), 1000M, MSTR/HEAD and CPLR/TAIL
Two relay outputs with current carrying capacity of
1A @ 24 VDC
Two inputs with the same ground, but electrically
isolated from the electronics
• For state "1": +13 to +30V
• For state "0": -30 to +3V
• Max. input current: 8 mA
TP port's 100 Mbps link is inactive.
TP/SFP port's 1000 Mbps link is active.
TP/SFP port's 1000 Mbps link is
inactive.
- 13 -
Advertisement
Table of Contents
