Replacing The Rear Valve Cover - Cornelius SFV1 Installation And Service Manual

6.2

Replacing the rear valve cover

Prerequisites
The front valve cover has been removed.
Spare parts
SFV1 portion control: Valve cover rear
SFV1 push button: Valve cover rear
SFV1 dosing lever: Valve cover rear
NOTICE!
The replacement procedure for the rear valve cover is exactly the same on the dispensing valves SFV1.
Replacement is described here analogously using an example.
1. Push the rear valve cover (Fig. 20/1) forwards and lift the rear valve cover (Fig. 20/1) upwards.
2. Position the new rear valve cover (Fig. 21/1) on the dispensing valve from above.
3. Push the rear valve cover (Fig. 21/1) backwards onto the dispensing valve.
Finishing tasks
1. Mount the front valve cover, see chapter 6.1.
Installation and service manual Dispensing valve
SFV1
16
References
see chapter 6.1
ID/reference
620050575
620050575
620050575
Qty/amount Comment
1
1
1
Fig. 20
Fig. 21
Cornelius Deutschland GmbH
Document no. TD2005100
Version 15/03/2019, Index 0
Repairs
1
1