Installing The Unit - Cornelius Nueva Style Installation And Service Manual

5.3

Installing the unit

Prerequisites
The unit has been unpacked.
Preparation of the installation location is complete.
Required tools/materials
Threaded bolts
Washers
Wing nuts
Flat seal
Sealing lip
Stand booster
Tower cable diagram
Undercounter cooler cable diagram
Operator manual
Tower
Undercounter cooler installation and
service manual
DANGER!
Risk of personal injury and equipment damage due to non-compliance with rules and regulations!
Risk of death in the case of non-compliance with rules and regulations regarding connection of the water sup-
ply!
• In accordance with the current state of the art, install the water supply on the product using an air gap pro-
tection back flow system, a vacuum control valve or some other method that has proved effective during
tests. Installation must be carried out in compliance with all federal, state and local laws.
• Water pipe connections and fixtures that are directly connected to the drinking water supply must be in-
stalled and serviced in compliance with federal, state and local laws.
Mounting the unit without a stand booster
1. Attach the threaded bolts (Fig. 3/1), on the stand (Fig. 3/2) of the unit, by screwing the threaded
bolts into the stand (Fig. 3/2).
2. Position the flat seal (Fig. 4/2) on the stand (Fig. 4/1) of the unit.
Cornelius Deutschland GmbH
Document no. TD0004100
Version 01/07/2019, Index 1
References
See the document "Tower operator manual", document no.
TD0004000
see chapter 5.2
ID/reference Qty/amount
143579150 4
135916008 4
135891000 4
220107136 1
220107137 1
220107459 1
220107460 1
220107461 1
220046720 1
Various 1
Document no. 1
TD0004000
Document no. 1
Various
Comment
Only when mounted without a stand booster
Only when mounted with a stand booster
Neutral
Red
Blue
see chapter 10.1
1
1
Fig. 3
Fig. 4
Installation and service manual Tower
Installation/removal
2
1
2
Nueva Style
9