Advertisement

Installation and service manual
Tower
Nueva Style

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Nueva Style and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cornelius Nueva Style

  • Page 1 Installation and service manual Tower Nueva Style...
  • Page 2 Legal notice Installation and service manual (Translation of the original manual) Document no. TD0004100 Tower Unit ID no. 221000250 Nueva Style Version Date of issue: 01/07/2019 Revision status: Index 1 Protection notices (in accordance with DIN ISO 16016:2017-08) The reproduction, distribution and utilisation of this document as well as the communication of its contents is prohibited, unless expressly permitted.
  • Page 3: Table Of Contents

    ..........7.12 Replacing the dispensing valve support Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100...
  • Page 4 ............. . . 10.1 Tower cable diagram Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 5: Safety

    Improper use of the unit and unauthorised modifications to the unit and its components may cause personal injury and equipment damage for which Cornelius Deutschland GmbH shall assume no liability. Improper use of the unit is prohibited. You can find further information about the improper use of the unit – and the meaning of improper use – in the tower operator manual, document no.
  • Page 6: Transport And Packaging

    Transport and packaging Choose a suitable packaging when returning the unit itself or one of its components to Cornelius Deutschland GmbH, e.g. for re- pairs. In particular, make sure that the unit and any components are protected from shock/impact, moisture, dirt and electrostatic discharge (ESD).
  • Page 7: Description

    Dispensing valves NOTICE! Information on the dispensing valves installed on your unit can be found in the binding documentation for the respective dispensing valve. Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100 Nueva Style Version 01/07/2019, Index 1...
  • Page 8: Functions Within The Dispensing System

    Power supply to the tower Cable 220046597 Power supply to the voltage transformer for the lighting kit 1. ID = inside diameter 2. OD = outside diameter Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 9: Preparing The Unit

    All wiring and plumbing must be carried out in compliance with national and local laws, regulations and guidelines. Non-compliance with these laws, regulations and guidelines may result in death, serious injury or equipment damage. Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100...
  • Page 10: Installation Location

    4. Saw the opening for the tubes and cables into the supporting structure as indicated on the drill template. 5. Remove any dirt or dust from the supporting structure. Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100...
  • Page 11: Installing The Unit

    (Fig. 3/2). Fig. 3 2. Position the flat seal (Fig. 4/2) on the stand (Fig. 4/1) of the unit. Fig. 4 Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100 Nueva Style Version 01/07/2019, Index 1...
  • Page 12 1. Attach the threaded bolts (Fig. 9/1), on the stand (Fig. 9/2) of the unit, by screwing the threaded bolts into the stand (Fig. 9/2). Fig. 9 Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 13: Removing The Unit

    4) in the undercounter cooler. Fig. 12 3. Disconnect all tubes (Fig. 13/1) from the python (Fig. 13/2). 4. Attach a cap to each tube. Fig. 13 Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100 Nueva Style Version 01/07/2019, Index 1...
  • Page 14 1. Carry out step 1 to step 8 of “Removing the unit without a stand booster”. 2. Remove the sealing lip (Fig. 18/1) from the stand booster (Fig. 18/2). Fig. 18 Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 15: Still Water Option

    Finishing tasks 1. Install the front panel; see chapter 7.9. 2. Mount the dispensing valve; see the dispensing valve documentation. Fig. 22 Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100 Nueva Style Version 01/07/2019, Index 1...
  • Page 16: Maintenance

    Tower, outside Clean. See the document “Tower operator manu- al”, document no. TD0004000 Every 3 months Tower, inside Clean the tubes/valves; see chapter 6.2 Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 17: Cleaning The Tubes And Valves

    8. Depressurise the cleaning container and the tubes by using the pressure relief valve on the cleaning container. 9. Fill the cleaning container with clear water. step 9 Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100 Nueva Style...
  • Page 18: Repairs

    Information regarding the replacement of the dispensing valves installed on your unit can be found in the bind- ing documentation for the respective dispensing valve. Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 19: Replacing The Drip Tray And The Grill

    2. Lift and remove the front panel (Fig. 27/4) with taxi cab hood (Fig. 27/1) from the rear panel (Fig. 27/2) in a forward motion. 3. Disconnect the electrical cables on the voltage transformer (Fig. 27/3). Fig. 27 Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100 Nueva Style...
  • Page 20 15. Attach the retaining plate (Fig. 32/2) using the fastening bolts (Fig. 32/1). 16. Position the taxi cab hood (Fig. 29/1) on the front panel (Fig. 29/2). Fig. 32 Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 21: Replacing The Display

    6. Remove the fastening bolts (Fig. 36/2) from the retaining plate (Fig. 36/3). 7. Remove the retaining plate (Fig. 37/3) with display from the taxi cab hood (Fig. 37/4) Fig. 36 Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100...
  • Page 22 12. Remove the fastening bolts (Fig. 40/1) from the rear promotional pane (Fig. 40/2). Fig. 40 13. Remove the rear promotional pane (Fig. 41/1) from the taxi cab hood (Fig. 41/2). Fig. 41 Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 23: Replacing The Hood

    Fig. 43 2. Lift and remove the front panel (Fig. 44/3) with hood (Fig. 44/1) from the rear panel (Fig. 44/2) in a forward motion. Fig. 44 Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100 Nueva Style...
  • Page 24: Replacing The Lighting Kit

    7. Apply the LED strip (Fig. 47/2) to the adhesive area on the retaining plate (Fig. 47/1). Fig. 47 Finishing tasks 1. Install the lighting kit; see chapter 7.6. Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 25: Replacing The Key Switch

    6. Connect any electrical cables, if applicable. 7. Position the front panel (Fig. 50/2) on the rear panel (Fig. 50/1). 8. Attach the front panel (Fig. 49/2) using the fastening bolts (Fig. 49/1). Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100...
  • Page 26: Replacing The Left/Right Front Inserts And Wrap Film

    6. Insulate the soda dispenser using the large insulation; see chapter 7.12. Finishing tasks 1. Install the front panel; see chapter 7.9. Fig. 52 2. Mount the dispensing valves; see dispensing valve documentation. Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 27: Replacing The Dispensing Valve Support

    Only for units without a soda dispenser: Position the soda tubes within the dispensing valve Fig. 54 support. Finishing tasks 1. Install the soda dispenser (optional), if required; see chapter 7.11. Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100 Nueva Style Version 01/07/2019, Index 1...
  • Page 28 3. Clean the outside of the unit; see the document “Tower operator manual”, document no. TD0004000. 4. If applicable, carry out the configuration settings for the dispensing valves; see dispensing valve documentation. Fig. 55 Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 29 All wiring and plumbing must be carried out in compliance with national and local laws, regulations and guidelines. Non-compliance with these laws, regulations and guidelines may result in death, serious injury or equipment damage. Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100...
  • Page 30 CO system) Fault or error on the undercounter cooler See undercounter cooler documentation supply too low Change the CO bottle Installation and service manual Tower Cornelius Deutschland GmbH Nueva Style Document no. TD0004100 Version 01/07/2019, Index 1...
  • Page 31 Applicable documents Applicable documents 10.1 Tower cable diagram Cornelius Deutschland GmbH Installation and service manual Tower Document no. TD0004100 Nueva Style Version 01/07/2019, Index 1...
  • Page 32 Cornelius Deutschland GmbH Tel.: +49 (0) 21 73 / 79 3 – 0 Carl-Leverkus-Str. 15 Fax: +49 (0) 21 73 / 77 4 – 38 40764 Langenfeld E-Mail: info@cornelius.com Germany...

This manual is also suitable for:

221000250

Table of Contents