Table of Contents
Advertisement
Calling Features
Mobile Connect
Mobile Connect allows you to use your mobile phone to handle calls associated with the conference station
phone number.
To set up Mobile Connect, use the Cisco Unified Communications Manager Self Care Portal to set up remote
destinations and create access lists to allow or block calls from specific phone numbers from being passed to
the remote destinations.
When you enable Mobile Connect:
• The conference station and remote destinations receive calls simultaneously.
• When you answer the call on the conference station, the remote destinations stop ringing, disconnect,
• When you answer the call on one remote destination, the other remote destinations and the conference
Enable Mobile Connect
Procedure
Step 1
Press More.
Step 2
Press Mobility to display the current remote destination status (Enabled or Disabled).
Step 3
Press Select to change the status.
Step 4
Press Exit.
Switch IP Phone Call to Mobile Phone
Procedure
Step 1
Press More.
Step 2
Press Mobility.
Step 3
Select To mobile.
Step 4
Answer the in-progress call on your mobile phone.
You cannot use the conference station for any other calls while this call is still in progress.
The Call button LED lights solid red, and the calling party number displays on the phone.
Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager
and display a missed call message.
station stop ringing, disconnect, and a missed call message displays on the other remote destinations.
Mobile Connect
59
Advertisement
Table of Contents
