Led State Definitions - Cisco Unified IP Conference Phone 8831 User Manual

Features of Your Cisco Unified IP Conference Phone
In addition, the following optional extension kits can be added to or used with the conference phone:
• Wired Microphone Extension Kit
• Wireless Microphone Extension Kit and Charger
For your conference phone to work, it must be connected to the corporate IP telephony network.

LED State Definitions

LEDs on the Sound Base and DCU provide information about the state of the conference phone.
For example, green flashing lights on the Sound Base and on the DCU Call button indicate that there is an
incoming call. If the conference phone is on mute, then an incoming call will still flash green on the Call
button, but the LED for the DCU mute button is solid red, the sound base LEDs are solid red, and the mute
button on the Sound Base is also solid red.
The following table is a guide to the behaviour of the LEDs on the sound base and the DCU.
Table 1: Conference Phone LED State Table
Media Path
Status
Off
Off
Off
Off
Off
Off
Off
Off
Unmuted
Unmuted
Unmuted
Unmuted
Muted
Muted
Muted
Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager
Call on Focus
Base LEDs (3)
No call
No call, with VM
DND flash green
Incoming call green
Hold Revert Call green
Hold Call green
Hold Remote Call
Remote in use Call
Ringout/Connected Call green
DNDFlash green
Incoming Call green
Hold Revert Call green
Ringout/Connected red
DND Flash red
Incoming Call red
Sound Base Display Control Unit (DCU)
Mute Button DCU Call
red
flash green
flash green
flash green
pulse green
red
red
solid green
solid green
solid green
solid green
solid red solid green
solid red solid green
solid red solid green
LED State Definitions
DCU Mute
Button Button
solid
flash
flash
flash
pulse
pulse
solid
solid
flash
flash
flash
solid red solid
flash red solid
flash red solid
7