Ip Phone Information - Cisco Unified IP Conference Phone 8831 User Manual

IP Phone Information

Procedure
Step 1
Connect the DCU to the conference phone to be used as the primary unit.
Step 2 Connect the network cable to the conference phone to be used as the primary unit.
Step 3
Connect the power cable to the primary device and plug into a wall plug.
The secondary Sound Base does not need to be plugged into external power, but in Linked Mode the primary
unit must be connected to external power.
Step 4 Use the provided daisy cable to connect the primary unit to the secondary sound base.
Voice, dial tone, ringer and base LEDs synchronize between the two units.
Related Topics
IP Phone Information
Phone Information allows you to view the following model information for your phone:
• Model Number
• IP Address
• MAC Address
• Active Load
• Inactive Load
• Last Upgrade
• Active Server
• Stand-by Server
• Mic 1 status
• Mic 2 status
• Wireless Mic 1 RF ID
• Wireless Mic 2 RF ID
• System RF ID
• Linked Mode status
• Backlight On Time
• Backlight On Duration
• Backlight Idle Timeout
• Days Backlight Not Active
Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager
32
Linked Mode, on page 31
Applications