Enable Extension Mobility; Hold; Hold Active Call - Cisco Unified IP Conference Phone 8831 User Manual

Enable Extension Mobility

Note • Extension Mobility automatically logs you out after a certain amount of time. Your system administrator
• Changes that you make to your Extension Mobility profile from Cisco Unified Communications Manager
• Changes that you make to a phone or conference station from Cisco Unified Communications Manager
• Local settings controlled by the phone are not maintained in your Extension Mobility profile.
Enable Extension Mobility
Procedure
Step 1
Press Apps.
Step 2 Select EM Service.
Step 3
Enter your user ID and PIN.
The user ID and PIN are provided by your system administrator
Step 4 If prompted, select a device profile.
Step 5
To sign out, press Apps.
Step 6 Select Services.
Step 7
Select EM Service.
Step 8 At the prompt, press Yes.

Hold

Hold allows you to put an active call into a held state. Your phone allows one active call at a time; other calls
are put on hold.

Hold Active Call

Procedure
Step 1 To put an active call on hold, press Hold.
The Hold icon
Cisco Unified IP Conference Phone 8831 and 8831NR User Guide for Cisco Unified Communications Manager
56
establishes this time limit.
Self Care Portal take effect immediately if you are logged in to Extension Mobility on the physical device;
otherwise, changes take effect the next time you log in.
Self Care Portal take effect immediately if you are logged out of Extension Mobility; otherwise, changes
take effect after you log out.
displays as a status icon.
Calling Features