PTI security systems Wireless Door Alarm System Installation And Operation Manual page 77

Are the wireless repeaters on the site working?
16
Remove the cover of the repeater box and check the LED
indicators on the front of the repeater.
There are five lights on the front of the repeater as shown in
"Drawing 21: Repeater LEDs" on page 71.
LED labeled POWER
LED labeled LO BAT
LED labeled DECODE
LED labeled XMT
If the POWER light is OFF
Yes
– Retest the site
for repeater locations
17 Has there been any construction on, or near, the site?
This includes any changes to the site, adding units, reconfiguring
units, changing or adding video surveillance components,
changing any electrical wiring, roofing changes, painting, etc.
Even with a small change, wiring can be disturbed or disconnected
or something new can interfere with equipment operation.
rev. 7-2017 114A3873.D
Wireless Door Alarm System
lit when receiving power. The
LED lights GREEN when the unit
is receiving power.
RED when receiving battery
power
lit when the high power repeater
has a low battery
flashes when any recognizable RF
transmission is received
lit when transmitting an RF
transmission
check the connection to the
power transformer.
No
Technical Support for
further assistance
– Contact PTI
72