Page 1
LOAD LEVELLER Model No. CLL500 Part No. 7630115 OPERATING, MAINTENANCE & SAFETY INSTRUCTIONS 0520...
Page 3
Clarke Load Leveller. GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Your receipt is required as proof of purchase. This guarantee is invalid if the product is found to have been abused in any way, or not used for the purpose for which it was intended.
Page 4
PREPARATION FOR USE Refering to the Parts List and Diagram, insert the large screw (2) through the hole at one end of the main body (1), threading it through the Sliding Block and out through the hole in the opposite end of the body. Fit the Spacer (3) on to the end of the threaded screw, followed by the Crank Arm (4) and secure in place using the nut (5).
Page 5
NOTE: If the Leveller is subjected to any abnormal load or shock, it should be removed from service immediately and inspected by a local service agent or Clarke International Service Division. Periodically a) check the main beam for cracks and distortion.
Page 6
PARTS LIST & DIAGRAM No. Description Part No. No. Description Part No. 1 Main Body SN50001 7 Bolt M12x115 SN50007 2 Screw SN50002 8 Nut M12 SN50008 3 Spacer SN50003 9 Hook SN50009 4 Crank Handle SN50004 10 Nut M10 SN50010 5 Nut M12 SN50005...
Need help?
Do you have a question about the Strong-Arm CLL500 and is the answer not in the manual?
Questions and answers