Activating The Frequency Voice Announcement; Setting The Announcement Function Operation - Yaesu FTM-100DR/DE Operating Manual

3
Rotate the DIAL to select [OK?], then press
The recordings are erased.
Caution This operation erases all the recorded audio. Even
when there are 2 or more tracks, individual tracks
cannot be erased.
After erasing completes, "ALL" appears for [TRCK].
4
Press and hold
Returns the display to the previously viewed screen.

Activating the frequency voice announcement

Setting the announcement function operation

The following settings may be customized:
• Setting how an announcement is initiated.
• Selecting the language
• Setting the announcement volume level
• Muting the receive audio while announcements are being made
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [12 OPTION], then press
.
3
Rotate the DIAL to select [2 VOICE MEMORY], then
press .
The detail setting screen appears.
4
Rotate the DIAL to select [2 ANNOUNCE], then
press .
5
Rotate the DIAL to select the desired setting.
"AUTO": Makes announcements when pressing and holding
second or when changing the band.
"OFF": Deactivate the announcement function.
"MANUAL": Makes announcements when pressing and holding
second.
Tip
The default setting: AUTO
6
Press .
7
Rotate the DIAL to select [3 LANGUAGE], then
press .
Recording and listening to received audio
for over one second.
for over one second.
.
for over one
for over one
163